Grain-systems PNEG-1283 Manuel d'utilisateur télécharger pdf (Page 13)

4. Installation

PNEG-1283 Moisture Sampler 13

Installation Instructions for Dryers with New Discharge Box Assembly

Figure 4K

1. Remove the Moisture Sampler tube cover plate (D01-1886). (See Figure 4K.)

2. Remove the Moisture Sampler cover plate (D01-1885). (See Figure 4K.)

3. Install the Moisture Sampler using three (3) 5/16" bolts (S-8135) and nuts (S-3611) on the drive end

and four (4) 5/16" bolts (S-8135) nuts (S-3611) on the sensor end making sure the heads of the

bolts are on the inside of the auger tube.

Moisture sampler

cover plate (D01-1885)

Standard grain sampler

Moisture sampler tube

cover plate (D01-1886)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Pas de commentaire

Grain-systems PNEG-1283 Manuel d'utilisateur Page 13